Wake On Lan Windows 10/11 for ASRock H81M-DGS R2.0

 Wake On Lan Windows 10/11 for ASRock H81M-DGS R2.0

1. Flash your BIOS to P1.30 or Above (IMPORTANT) WOL only work on this BIOS

2. Enable or disable S5 WOL in Windows 11

3. For wake-on-lan from WAN

Setup your router Port Forward. Note that: you should bind your MAC and IP otherwise you can only wake on LAN if you are using same LAN. Note that: some sofware on phone not support broadcast when in same LAN and some software support broadcast but not support on WAN.

Method is BIND MAC to IP ==> Router will forward the packet to the MAC that we setup.

Use the following procedure to enable or disable S5 WOL with LAN driver V11.10 (NetCX V1166.10.720.2022). 

Driver link: https://www.realtek.com/Download/List?cate_id=584 /=>> Win11 Auto Installation Program (NetAdapterCx)

After trying many time on different BIOS version and LAN driver I found this helpful post: https://support.hp.com/th-en/document/ish_8849455-8849499-16

In Windows, search for and open Device Manager.

Double-click the Network Adaptors device type, and then right-click Realtek PCIe GbE Family Controller.

Click Properties.

On the Advanced tab, select the Shutdown Wake-On-Lan property, and then select either Enabled in the Value box.

Click OK.

3. (Skip if you dont use Windows 10) Enable or disable S5 WOL in Windows 10

Use the following procedure to enable or disable S5 WOL with LAN driver V10.060(NDIS).

In Windows, search for and open Control Panel.

Click Power Options, and then click Choose what the power buttons do.

Click Change settings that are currently unavailable.

In the Shutdown settings section, click Turn on fast startup (recommended) to disable WOL. Clear Turn on fast startup (recommended) to enable WOL.

Click Save changes.